Black Rifles & Tactical Guns

AR-18: ArmaLite’s Other Black Rifle

Guns and Gear Contributor
Font Size:

By Brian Meyer, Gun Digest

Known for their development of the famed AR-15, Armalite’s AR-18 was another important tactical trendsetter in the black rifle space.

Evolution of the AR-18

In the early ’50s, Eugene Stoner worked on the 7.62 x 51mm AR-10 rifle, and after several years of revision, in 1956-57, the rifle was offered up as Armalite’s entry into the U.S. military’s trials to replace the M1 Garand as the standard service rifle. Stoner’s AR-10 went up against the FN FAL (dubbed the T-48 in trials) and the M-14 (dubbed the T-44) in a competition to provide the U.S. with the “rifle of the future.”

The AR-10 was not selected, so ArmaLite licked their wounds and moved on to continue designing cutting-edge firearms using state-of-the art materials (plastics, polymers, titanium and Stellite) when other manufacturers were still dealing in steel and wood.

In 1956, Stoner was also working on a new lightweight rifle, the AR-15, which fired the 5.56mm/.223 round that the U.S. and NATO were exploring. This rifle was eventually adopted by the military, beginning with the U.S. Air Force in 1961, and became the standard military rifle.

At the same time he was working on the AR-15, Stoner collaborated with ArmaLite engineer Arthur Miller on a lightweight, easy to manufacture rifle to be shopped to U.S. allies whose armed forces couldn’t afford the expensive AR-10. The AR-16 was, for all intents and purposes, an experiment. It was made of sheet metal stampings and on machinery that was not expensive and could be operated by indigenous personnel in developing nations.

The folding stock of the AR-18 is difficult to replace, so the author used a FAL-style folder on his rifle. Author photo

The folding stock of the AR-18 is difficult to replace, so the author used a FAL-style folder on his rifle. Author photo

The rifle was designed to have only a few machined and milled parts, including the barrel, bolt and carrier, and flash hider. Surprisingly, this rifle wasn’t intended to supplant the U.S. military’s M-14 rifles, but rather, it was designed to be a cheap and easy to manufacture rifle to support Asian, African and South American allies in the battle against communism.

Unfortunately, the rifle didn’t really make it past the prototype stage, but the lessons learned in its design and construction would be used in ArmaLite’s next automatic rifle, the AR-18.

The AR-18 was designed and patented after Stoner’s departure from ArmaLite, but it still bore some design elements from his previous AR-10, AR-15 and AR-16 offerings. Arthur Miller, who worked on the AR-16 project with Stoner, along with two other engineers named George Sullivan and Charles Dorchester, began, in 1962, to design a new AR-16.

It would be in a 5.56mm format and easy for unskilled labor to manufacture. Miller and his team took the lessons learned from the AR-16 and put them into practice with the AR-18 design. Again, it was made largely of stamped metal, and the number of forging and machining operations required for manufacture were minimized.

When the rifle debuted in 1964, it was a pretty neat offering—shorter than the AR-15, with an 18-inch barrel instead of the 20-inch AR-15. It also had a clever side-folding stock that made vehicle transport much easier than carrying a full-sized rifle. Unfortunately, by the time it was released, the U.S. was entrenched in the Vietnam Conflict and had little to no desire to adopt the new AR-18, although they did test a few. It didn’t seem like too many other nations wanted the new rifle either.

Production was started in 1967 on the rifle based on some limited orders at the Howa factory in Japan (ArmaLite at the time was more of a design and prototype company, not a manufacturing facility), and even this was problematic. The Japanese government forbade the shipment of weapons to nations actively involved in the war in Southeast Asia. As a result, production was moved to Costa Mesa, Calif.

The AR-18 had a civilian counterpart called the AR-180. This was designed to be a sporting rifle or a police long arm, and was semi-automatic only. It sold marginally well. It seemed that the only enthusiastic users of the AR-18 were those in the Irish Republican Army, which used illegally purchased and stolen ArmaLite rifles in Northern Ireland against the British, and even nicknamed the rifle “The Widowmaker.” In 1980, after roughly 16 years of production in Japan, the U.S. and, later, in Dagenham, England, production ceased.

My First AR-18

One major design flaw is that the AR-18 cannot use AR-15 mags. Author photo

One major design flaw is that the AR-18 cannot use AR-15 mags. Author photo

At a gun show in February of 2004, I got an almost identical representation of the AR-18/180 that Arnold used in The Terminator. It was even missing the butt stock just like the rifle in the movie. The best part was they were only asking $300 for it.

I bought the rifle and took it home with the intent of quickly getting a new stock from an online vendor. Wrong. Evidently, butt stocks for the AR-180 are made of “un-obtanium.” They were unavailable at any price, so I had my machinist friend make a mounting block to attach to the rear of the sheet metal receiver, and I put an Ace FN-FAL style folder on it. It wasn’t historically accurate, but I could at least fire it from the shoulder.

So by March of 2004, my dream rifle had a stock and could be fired. I took it for a test run. My impressions were that the designers did a lot of things right with the AR-18/180 and quite a bit wrong. It was fairly accurate, as long as I stayed with 55-grain bullets. The 1:12 rifling would turn heavier projectiles into boat-shaped holes in the target.

The trigger was very heavy compared to most AR-15s I’ve fired. Also, the proprietary magazine release and mag-locking cut in the magazine made finding the correct magazine difficult. The AR-15 can use an AR-18 mag, but not vice-versa.

What did they do right? The gas system is very, very good. My rifle has eaten every round I’ve thrown at it. The ergonomics are pretty good, too. Plus the folding stock makes it handy to carry. However, all things considered, I wish the Terminator had chosen a rifle with a better trigger. While I still think my AR-180 is cool, it’s not the go-to gun I imagined it would be after watching that film back in 1984.

I shoot it every once in a while, and my range mates all think it looks cool, but after owning my own ArmaLite AR-180, I came to the inexorable conclusion that I’d have to move on to my second favorite semiautomatic to appear in a film. I saw Robin Williams in this movie called The Survivors, and he had this Valmet M-76—maybe we’ll talk about that next time.

———-

Be sure to take advantage of Gun Digest’s free downloads to learn all about Gun ValuesAR-15 OpticsGlock Accessories and Concealed Carry Holsters.

———

 

PREMIUM ARTICLE: Subscribe To Keep Reading

Sign up

By subscribing you agree to our Terms of Use

You're signed up!

Sign up

By subscribing you agree to our Terms of Use

You're signed up!
Sign up

By subscribing you agree to our Terms of Use

You're signed up!

Sign up

By subscribing you agree to our Terms of Use

You're signed up!
Sign up

By subscribing you agree to our Terms of Use

You're signed up!

Sign Up

By subscribing you agree to our Terms of Use

You're signed up!
Sign up

By subscribing you agree to our Terms of Use

You're signed up!
Sign up

By subscribing you agree to our Terms of Use

You're signed up!
BENEFITS READERS PASS PATRIOTS FOUNDERS
Daily and Breaking Newsletters
Daily Caller Shows
Ad Free Experience
Exclusive Articles
Custom Newsletters
Editor Daily Rundown
Behind The Scenes Coverage
Award Winning Documentaries
Patriot War Room
Patriot Live Chat
Exclusive Events
Gold Membership Card
Tucker Mug

What does Founders Club include?

Tucker Mug and Membership Card
Founders

Readers,

Instead of sucking up to the political and corporate powers that dominate America, The Daily Caller is fighting for you — our readers. We humbly ask you to consider joining us in this fight.

Now that millions of readers are rejecting the increasingly biased and even corrupt corporate media and joining us daily, there are powerful forces lined up to stop us: the old guard of the news media hopes to marginalize us; the big corporate ad agencies want to deprive us of revenue and put us out of business; senators threaten to have our reporters arrested for asking simple questions; the big tech platforms want to limit our ability to communicate with you; and the political party establishments feel threatened by our independence.

We don't complain -- we can't stand complainers -- but we do call it how we see it. We have a fight on our hands, and it's intense. We need your help to smash through the big tech, big media and big government blockade.

We're the insurgent outsiders for a reason: our deep-dive investigations hold the powerful to account. Our original videos undermine their narratives on a daily basis. Even our insistence on having fun infuriates them -- because we won’t bend the knee to political correctness.

One reason we stand apart is because we are not afraid to say we love America. We love her with every fiber of our being, and we think she's worth saving from today’s craziness.

Help us save her.

A second reason we stand out is the sheer number of honest responsible reporters we have helped train. We have trained so many solid reporters that they now hold prominent positions at publications across the political spectrum. Hear a rare reasonable voice at a place like CNN? There’s a good chance they were trained at Daily Caller. Same goes for the numerous Daily Caller alumni dominating the news coverage at outlets such as Fox News, Newsmax, Daily Wire and many others.

Simply put, America needs solid reporters fighting to tell the truth or we will never have honest elections or a fair system. We are working tirelessly to make that happen and we are making a difference.

Since 2010, The Daily Caller has grown immensely. We're in the halls of Congress. We're in the Oval Office. And we're in up to 20 million homes every single month. That's 20 million Americans like you who are impossible to ignore.

We can overcome the forces lined up against all of us. This is an important mission but we can’t do it unless you — the everyday Americans forgotten by the establishment — have our back.

Please consider becoming a Daily Caller Patriot today, and help us keep doing work that holds politicians, corporations and other leaders accountable. Help us thumb our noses at political correctness. Help us train a new generation of news reporters who will actually tell the truth. And help us remind Americans everywhere that there are millions of us who remain clear-eyed about our country's greatness.

In return for membership, Daily Caller Patriots will be able to read The Daily Caller without any of the ads that we have long used to support our mission. We know the ads drive you crazy. They drive us crazy too. But we need revenue to keep the fight going. If you join us, we will cut out the ads for you and put every Lincoln-headed cent we earn into amplifying our voice, training even more solid reporters, and giving you the ad-free experience and lightning fast website you deserve.

Patriots will also be eligible for Patriots Only content, newsletters, chats and live events with our reporters and editors. It's simple: welcome us into your lives, and we'll welcome you into ours.

We can save America together.

Become a Daily Caller Patriot today.

Signature

Neil Patel