Guns and Gear

Gun Test: Walther PDP Handgun In 9mm

Font Size:

By Daniel T. McElrath, Shooting Illustrated

Walther Arms has been putting out some very good pistols for a very long time. Nonetheless, despite consistently producing the best trigger among mass-produced, striker-fired guns, Walther pistols seemed to get lost in the crowd. One company leapt to the forefront of the polymer-frame, striker-fired pack and has refused to give up its lead. Another won the U.S. military pistol contract. Yet, another maintains a cult-like following despite (actually, because of) abusing its fans. And there are many others occupying various niches within the personal-protection pistol market.

Well, a rising tide lifts all boats. The market’s currently rising tide is, of course, due to the uncertainty of social upheaval, a pandemic, movements to defund police departments and anticipated assaults on gun rights. And onto this tide Walther has launched its new flagship—the PDP.

Few in number but large in size, the “SuperTerrain” cocking serrations are effective • Though fully adjustable, the rear sight is snag-free and square enough for one-handed racking • The trigger was lauded for both its shape and pull weight


A Different Gun

It’s ironic that Walther’s most iconic (not most historically significant; that would be the P38) pistol is the PPK, because in many ways the new gun is the polar opposite of 007’s preferred weapon. The PPK is a small, sleek, heavy, all-steel, modestly powered and low-capacity pistol with what can be kindly described as a heavy double-action trigger. Blessedly, the PDP is none of those things (which is not to denigrate the PPK, a pistol that will eternally earn cool points.)

Despite the slide’s blocky looks, the PDP is fairly light and handles well • A full-size PDP is shown with an MRDS mounted in its deeply cut slide.


Even in Compact guise (which we’re focused on here), the PDP is not little. It’s pleasantly, reassuringly, hand-fillingly ergonomic. It’s not excessively large, it’s just that you are not going to fumble for it when drawing from concealment. It’s not sleek. That may sound like a bad thing and, aesthetically, maybe it is. But, sleek often equates to slippery. The blocky blaster that is the PDP is remarkably easy to manipulate with no false moves.

With its polymer frame, it weighs slightly more than 24 ounces empty, just a few ounces more than the Lilliputian PPK. Its 9 mm chambering is now the standard for our military and most law-enforcement agencies. The double-stack magazines of the Compact hold 15 rounds of 9 mm (18 rounds in the full-size model) as opposed to the PPK’s six or seven rounds of .380 ACP. As for the trigger, well, Walther retains and maybe even extends its advantage over its striker-fired competitors. Compared to the PPK’s double-action pull, the PDP trigger takes only about one-third the effort.

Simplicity of takedown into constituent components should be a strong selling point of the PDP


Far Sighted

The PDP comes with a fully adjustable rear sight. Granted, part of the reason for this is to earn importation points, as a pistol with adjustable sights is deemed to have a sporting purpose, while fixed-sighted pistols are not. Even so, the unit included with the PDP is pretty decent. It has a big, square notch that allows plenty of light on either side of the front post for aiming that’s both fast and precise. Moreover, the sight is protected by sharp-angled wings that keep it both protected and snag-free.

Further, the wings are square enough to enable one-handed racking of the slide on a hard surface in the event of an emergency. The three-dot setup is not illuminated, but Walther has arguably arrived at something better: Choice. The company recognized that sights are highly personal for many folks and often the first component swapped out. To that end, Walther acknowledged the popularity of a certain Austrian pistol and made its rear-sight dovetail the same as its competitor’s. Want to replace the Walther sight for some reason? You now have the option of anything on the considerable aftermarket for that “other” pistol.

The muzzle end of the slide is just slightly scalloped to ease reholstering • A well-checkered and recurved trigger guard may annoy some trainers, but doesn’t hurt anything • The projection at the base of the frontstrap enhances leverage under the pinky, which can be important for quickly locating the red dot in the window.


Cocking serrations now come in many forms. Some are very fine, others are cut like fish or snake scales or otherwise stylized. Walther describes the PDP’s large, forward-canted serrations as being “SuperTerrain” because they project out beyond the original dimensions of the slide rather than being cut into it. They are really big, but I can’t argue with their effectiveness. They grab you as much as you grab them (though they didn’t snag on cover garments). They aren’t exactly graceful, but I’ll take useful over elegant any day.

There is a surprising amount of R&D incorporated into the grip frame. The slight recess at the juncture of the grip frame and the trigger guard that permits a high hold to maximize control is held over from earlier designs. The surface of the grip frame (except for the checkered frontstrap) has what the company calls “performance duty texture.” Polymer frames are notoriously slippery. The answer has typically been custom stippling or Talon Grips adhesive appliques.

However, some manufactures are now offering adequate stippling from the factory. This “performance duty texture,” though, is the best thing I’ve seen from a factory; very tactile without being abrasive. Additionally, Walther integrates a slight palm swell and three flat, subtle ridges that form barely perceptible finger grooves. As is the trend for premium polymer-frame pistols, the PDP comes with multiple (three) interchangeable backstrap inserts so the end user can customize the fit.

The final notable bit about the grip frame relates to another aspect of the PDP: The pistol is beyond “red-dot-ready.”

The texture on the grip frame offers excellent purchase without abrasiveness • A recess at the rear of the trigger guard permits a high hand hold for control, while a graceful projection protects the reversible mag release • Different-sized backstrap inserts allow a custom fit.


More Than Just a Slide Cut

As MRDS master Scott Jedlinski has noted, right-handed shooters who are adjusting to an MRDS-equipped pistol and having trouble locating the dot typically aim high and left. However, if they exert pressure with the pinky finger of their strong hand, the dot will suddenly appear in the window. With this in mind, the bottom of the PDP’s frontstrap protrudes to give leverage for the application of pressure from the pinky.

But Walther didn’t stop there in prepping the pistol for red-dot use. Of course, the PDP has a pre-cut slide, but one that’s especially deeply cut. In fact, an Aimpoint Acro sits so low on the PDP slide that it will co-witness with the front post. Tell Walther what red-dot sight you intend to mount, and the company will include the correct mounting plate as well as a cover plate should you choose to stick with irons.

Three double-stack magazines and a mag loader are included • The multi-slot accessory rail will accommodate a variety of light and/or laser devices.

Maximum Modularity

Modularity is a big talking point when discussing recent pistol designs. Walther jumps right in here, too. The 5-inch PDP full size will have 4- and 4.5-inch slides available from the company, while the 4-inch Compact will fit a 5-inch slide, too, should you desire something a little different. Want a CCO configuration? Mate a full-size barrel and slide to the Compact’s frame. Want a full-size, maximum-capacity pistol that’s short and fast-handling? Put a 4-inch upper on the full-size frame.

The niceties don’t end there. There’s an extended slide release—the actuation of which doesn’t require you to change your grip—and a large but protected magazine-release button. There is also a stepped chamber incorporated. This proven system, featuring a millimeter’s width of tightened fit at the front of the chamber, keeps pressure consistent, maximizing velocity while minimizing fouling. The looser fit towards the rear of the chamber assures reliable extraction.

When I think of Walther, I think trigger pull. OK, first I think “James Bond,” but trigger pull is a close second. I fired a Walther PPQ 45 that has the best out-of-the-box, striker-fired trigger I’ve felt. It now has a rival. Broken down, the pull seems complex and unimpressive. You collapse the bladed safety until it is flush with the front of the trigger. You then move both through about a quarter-inch of slack. Then there is engagement and a gentle roll like a car passing over an old and well-worn speed bump, then a low wall before the trigger breaks. While it sounds awful deconstructed, when you fire the pistol normally, you don’t feel all of that. You feel smooth, manageable resistance too slight to move the sights off target before the shot breaks—exactly what you want.

Shooting Impressions

The pistol shot nicely. Felt recoil was moderate and the sizable slide seemed to quell muzzle rise. The controls actuated easily and positively. A colleague who shot it lauded the effective, yet non-abrasive grip texture. She also liked the shape and width of the trigger, but expressed concern about the mushy and indistinct reset.

There were no failures to feed, fire or eject experienced throughout the testing of the pistol.

Thoughts

I own a pistol this good. It’s as comfortable, accurate and reliable as the PDP. Its grip frame has purchase equal to Walther’s new gun. And it has a compact frame and full-size slide. The problem is, my gun is the result of a “build.” I ordered, filed and fitted a trigger connector. I replaced the sights.

A gunsmith did a double undercut of the trigger guard. I added Talon Grips. The slide isn’t cut for an MRDS, though that was an option when I was putting it together. The CCO configuration required an aftermarket barrel and a frame extension.

All told, Walther’s greatest achievement with the PDP may be this: It is (for me) the most complete out-of-the-box, striker-fired pistol available at anywhere near the price. Despite the gun described above, I am not a tinkerer by nature, just picky. This would be one pistol I could live with in stock configuration, yet—remarkably—it may also be the simplest to modify, should you so desire.

PREMIUM ARTICLE: Subscribe To Keep Reading

Sign up

By subscribing you agree to our Terms of Use

You're signed up!

Sign up

By subscribing you agree to our Terms of Use

You're signed up!
Sign up

By subscribing you agree to our Terms of Use

You're signed up!

Sign up

By subscribing you agree to our Terms of Use

You're signed up!
Sign up

By subscribing you agree to our Terms of Use

You're signed up!

Sign Up

By subscribing you agree to our Terms of Use

You're signed up!
Sign up

By subscribing you agree to our Terms of Use

You're signed up!
Sign up

By subscribing you agree to our Terms of Use

You're signed up!
BENEFITS READERS PASS PATRIOTS FOUNDERS
Daily and Breaking Newsletters
Daily Caller Shows
Ad Free Experience
Exclusive Articles
Custom Newsletters
Editor Daily Rundown
Behind The Scenes Coverage
Award Winning Documentaries
Patriot War Room
Patriot Live Chat
Exclusive Events
Gold Membership Card
Tucker Mug

What does Founders Club include?

Tucker Mug and Membership Card
Founders

Readers,

Instead of sucking up to the political and corporate powers that dominate America, The Daily Caller is fighting for you — our readers. We humbly ask you to consider joining us in this fight.

Now that millions of readers are rejecting the increasingly biased and even corrupt corporate media and joining us daily, there are powerful forces lined up to stop us: the old guard of the news media hopes to marginalize us; the big corporate ad agencies want to deprive us of revenue and put us out of business; senators threaten to have our reporters arrested for asking simple questions; the big tech platforms want to limit our ability to communicate with you; and the political party establishments feel threatened by our independence.

We don't complain -- we can't stand complainers -- but we do call it how we see it. We have a fight on our hands, and it's intense. We need your help to smash through the big tech, big media and big government blockade.

We're the insurgent outsiders for a reason: our deep-dive investigations hold the powerful to account. Our original videos undermine their narratives on a daily basis. Even our insistence on having fun infuriates them -- because we won’t bend the knee to political correctness.

One reason we stand apart is because we are not afraid to say we love America. We love her with every fiber of our being, and we think she's worth saving from today’s craziness.

Help us save her.

A second reason we stand out is the sheer number of honest responsible reporters we have helped train. We have trained so many solid reporters that they now hold prominent positions at publications across the political spectrum. Hear a rare reasonable voice at a place like CNN? There’s a good chance they were trained at Daily Caller. Same goes for the numerous Daily Caller alumni dominating the news coverage at outlets such as Fox News, Newsmax, Daily Wire and many others.

Simply put, America needs solid reporters fighting to tell the truth or we will never have honest elections or a fair system. We are working tirelessly to make that happen and we are making a difference.

Since 2010, The Daily Caller has grown immensely. We're in the halls of Congress. We're in the Oval Office. And we're in up to 20 million homes every single month. That's 20 million Americans like you who are impossible to ignore.

We can overcome the forces lined up against all of us. This is an important mission but we can’t do it unless you — the everyday Americans forgotten by the establishment — have our back.

Please consider becoming a Daily Caller Patriot today, and help us keep doing work that holds politicians, corporations and other leaders accountable. Help us thumb our noses at political correctness. Help us train a new generation of news reporters who will actually tell the truth. And help us remind Americans everywhere that there are millions of us who remain clear-eyed about our country's greatness.

In return for membership, Daily Caller Patriots will be able to read The Daily Caller without any of the ads that we have long used to support our mission. We know the ads drive you crazy. They drive us crazy too. But we need revenue to keep the fight going. If you join us, we will cut out the ads for you and put every Lincoln-headed cent we earn into amplifying our voice, training even more solid reporters, and giving you the ad-free experience and lightning fast website you deserve.

Patriots will also be eligible for Patriots Only content, newsletters, chats and live events with our reporters and editors. It's simple: welcome us into your lives, and we'll welcome you into ours.

We can save America together.

Become a Daily Caller Patriot today.

Signature

Neil Patel